AVAILABLE MODELS
Model Cu Ft Lube Diameter U-Width Total Height Motor HP
NTG-300-F 1.8 Grease 30 7.0 39 1.0
NTG-2003-F 4.2 Grease 37 10.0 41 1.5
NTG-3614-FB 4.2 Grease 37 10.0 35 2.0
NTG-4822-F 7.0 Grease 49 11.5 40 5.0
NT-4822-F 7.0 Oil 49 11.5 40 5.0
NTG-5524-F 12.0 Grease 56 13.5 44 7.5
NT-5524-F 12.0 Oil 56 13.5 44 7.5
NT-6026-F 14.0 Oil 61 14.5 45 10.0
NT-7230-F 26.0 Oil 73 19.5 48 15.0
NT-9048-F 44.0 Oil 91 19.5 53 20.0
All dimensions are in inches  

Construction Details
The Torex® Batch Vibratory Finishing Machine Has a wide U-shaped process channel of heavy steel construction with a urethane lining. It is mounted on a rigid, round base and suspended with heavy-duty springs. Batch machines are usually used for larger parts that can be hand picked out of the media, or can be used with a unload door and screener to empty the entire bowl of smaller parts and media when the risk of part mixing is present.

ALL WELDED CONSTRUCTION: The processing chamber is an interlocking steel weldment. Center tube, bowl bottom, internal cone style gussets, and outer wrap materials are heavy-duty steel plate. The machine base is round with an upper spring mounting ring and a lower mounting ring for the three heavy steel feet.

URETHANE LINING: The processing bowl is fully lined with 1" minimum thickness 88 durometer, polyurethane in all wear areas of the machine. The standard lining has a ribbed straight outer wall.

CARTRIDGE DRIVE SYSTEM: The drive shaft and bearings are mounted in a one piece, solid steel tube with bearing retainers at each end. Oil seals are shaft mounted to eliminate wearing grooves in the shaft. The cartridge is mounted in the processing tub using a tapered socket and wedge bolts. It can easily be removed using normal maintenance tools.

LUBRICATION SYSTEM: A low-pressure oil pump is provided which provides lubrication to the main shaft bearings. A dual pressure switch system monitors the oil pump.